Hull Construction Part I

Use the (vertical) scrollbar at right as needed. Clicking on any thumbnail will take you to a larger version of the photo.

		First I installed butt-straps from Eduard.			Next I fabricated the shafts and struts. Note the upper sides of the hull have been color-coated.
		Another view of the shafts.			Shafts and struts complete.
		Here's the hull painted in MS22. The waterline tapers from 3-feet astern to 7-feet forward.			The shafts, props, and rudders installed.
		This view shows how "slender" the aft section of the hull is.			Side view of the completed hull.